Wolff Junio 18v Cordless Stripper

Description

Hand-held stripper ideal for removing small areas of carpet, foam or flooring residues

It is primarily used to remove linoleum, PVC, rubber, cork, design, and CV coverings as well as needle-punched floor covering and carpeted flooring.

 

• Great for hard to reach areas like window sills, under radiators and on stairs
• Perfect for areas near stairs, along walls or in closets
• Comes with carrying case
• Charger and Spare Battery Included
• Also Available in 115v site ready or 3-pin 230v Plug-in versions
• High Speed with light weight

Fit set comes complete with:

• Junior Stripper
• 1 blade
• Tool kit
• Spare battery
• Battery charger
• Carrying case
• Blade cover
• Safety gloves
• Hearing protection

For Needle-punched floor covering, carpet, PVC, etc: The coverings to be removed should be pre-cut in blade-widths (Pic. B) and then removed with the stripper in one step. In many cases, the glue can also be removed at the same time.

For Coverings without a foam backing: Prior to performing the stripping work, pre-cut the strips in blade-widths (Pic. B). Regularly check whether the blade is still straight and sharp.

For Coverings with a foam backing: Only use sharp blades! Remove the large Sections of the wearing surface. Use a carpet pulling claw for this. Then remove the foam residue with the stripper. If there is some foam in the recess, approach from the side.

For Coverings with a fleece backing: Do not remove the wearing surface beforehand. Cut the covering into strips and strip them together with the fleece backing.

Voltage	18 V
Working width	100/200 mm
Battery	5.0 Ah
RPM	8500 RPM
Noise pressure level	82.8 dB(A)
Noise power level	93.8 dB(A)
Hand/arm vibration	12.5 m/s²
Total weight	2.9 kg